Overview

Designed to get you in and out of most locations in 60 seconds, this quick-check device offers 12-lead ECG simulation, respiration, IBP and NIBP testing in the palm of your hand. Featuring specialized stay-connected ECG posts to ensure secure lead connections and no-hassle testing, ProSim 4 Vital Signs Simulator is the perfect patient simulator for first-call patient monitor quality assurance and safety professionals.

This combination cardiac rhythms/interactive ECG simulator, respiration simulator, IBP simulator and NIBP simulator offers an easy touch screen menu designed for a wide range of medical simulation requirements. ProSim 4 Vital Signs Simulator is perfect for on-call BMET professionals troubleshooting patient monitors throughout a hospital facility, and as a grab-and-go portable patient simulator.

Patient simulators provide key patient monitor troubleshooting support. The ProSim 4 Vital Signs Simulator offers the quick-check patient simulator technology of a 12-lead ECG simulator, respiration simulator, and blood pressure simulator in a single handheld multifunction device. It is 90 % smaller and lighter than single-function patient simulators, provides one-tap testing for most patient monitor checks, and runs all day on a single battery charge.
 

Features » Portable multifunction patient simulation test device offers 12-lead ECG simulation, respiration simulation, IBP simulation and NIBP simulation » 90% smaller and lighter than combined technology of single-function testing tools » Breakthrough touch screen technolgy » One-tap testing for most performance tests and checks » Easy quick-check patient monitor testing in one minute or less with onboard pre-sets and autosequences » Integrated, rechargeable battery capable of running quick checks all day » Stay-connected ECG posts for secure lead connections » Repeatable NIBP testing within 2 mmHg independent of device under test » Multi-language user interface offers choice of language selection » Tilt stand design for operation in tight spaces and better viewing angle   Models » ProSim4     Standard Accessories » Operator’s manual » User manual CD » Manual inflation bulb » Set of NIBP Cuff Adapters » Battery Pack » Power Supply » Line Cord » Carrying Case     Optional Accessories Specifications General specifications Temperature Operating: 10 °C to 40 °C (50 °F to 104 °F) Storage: -20 °C to +60 °C (-4 °F to +140 °F) Humidity 10 % to 90 % non-condensing Altitude 3,000 meters (9,843 ft) Dimensions (L x W x H) 18 cm x 9.3 cm x 5.5 cm (7.1 in x 3.7 in x 2.2 in) Display LCD touch-screen color display Communication USB port (for clibration and firmware updates only) Power Lithium-ion rechargeable battery Battery life 4 hours (minimum), 40 NIBP cycles typical Weight 0.88 kg (1.93 lb) Safety standards IEC 61010-1:2001 Certifications CE, CSA, C-TICK N10140 , RoHs Electromagnetic Compatibility (EMC) IEC 61326-1:2006 Detailed specifications Normal-sinus-rhythm waveform ECG Reference The ECG amplitudes specified are for Lead II (calibration), from the baseline to the peak of the R wave. All other leads are proportional. Normal sinus rhythm 12-lead configuration with independent outputs referenced to right leg (RL) Output to 10 Universal ECG Jacks, colour-coded to AHA and IEC standards. Amplitude 1 mV Display LCD touch-screen colour display Communication USB port (for calibration and firmware updates only) Amplitude accuracy ±5 % of setting Lead II ECG Rate 30, 60, 80, 90, 120, 150, 180, 210, 240, 270, 300, and 320 BPM Rate accuracy ±1 % of setting ECG Waveform selection Adult (80 ms) or neonatal (40 ms) QRS duration Power-on default 60 BPM, 1.0 mV, adult QRS Arrhythmia Atrial fibrillation Coarse or fine Premature ventricular contraction Left ventricular Ventricular tachycardia 160 or 200 BPM Ventricular fibrillation Coarse or fine Transvenous pacer pulse 75 BPM, left arterial, 3 mV amplitude on lead II, Accuracy ±10 %, 1.0 ms width 2nd Degree AV block Type 1 3rd Degree AV block 3rd degree AV block Asystole Asystole ECG Performance testing Amplitude 1 mV Square wave 60 ms at 2 Hz Respiration Rate 0 (OFF), 10 to 100 BrPM in 10 BrPM steps Impedance variations (? O) 1 O Accuracy delta ±(10 % + 0.05 ohm) Baseline 500 O to circuit common, giving 1000 O between any two leads Accuracy baseline ±5 % Respiration lead LA or LL (default) Invasive blood pressure Channels 1 electrically isolated from all other signals BP Output Circular DIN 5-pin Input/output impedance 300 O ± 10 % Exciter input range 2 to 16 V peak Exciter-input frequency range DC to 5000 Hz Transducer sensitivity 5 µV/V/mmHg Pressure accuracy ± (1 % of setting + 1 mmHg) Accuracy guaranteed for DC excitation only Static pressure 0, 80, 160, and 250 mmHg Dynamic waveforms Synchronization To ECG heartrate Chambers simulated and systolic/diastolic pressure: Type IBP (Arterial) IBP (Left ventrical) Adult 60/30 60/0 Adult 120/80 120/0 Adult 150/100 150/0 Adult 200/150 200/0 Neonatal 35/15 35/0 Neonatal 70/40 70/0 Non-invasive blood pressure Pressure units mmHg Manometer (pressure meter) Range 0 to 400 mmHg Resolution 0.1 mmHg (for display purposes) Accuracy ± (1 % reading + 1 mmHg) Pressure source Inflation bulb or device under test NIBP Simulations Pulse 2 mmHg max into 500 ml NIBP system Volume of air moved 1 ml max Simulations Adult: 60/30 (40), 120/80 (93); 150/100 (117); and 200/150 (167) Neonatal: 35/15 (22) and 70/40 (50) Repeatability Within ± 2 mmHg (at maximal pulse size independent of device under test) Synchronization To ECG heartrate (maximal rate 120 BPM) Leak test Target pressure 20 to 400 mmHg Elapse time 0:30 to 5:00 minutes: seconds in 30 second steps Leakage rate 1 to 200 mmHg/minute Pressure relief test range 100 to 400 mmHg Presets and autosequences Presets Normal Hypertensive Hypotensive Autosequences Cardiac failure sequence Exercise sequence Respiration sequence Monitor testing sequence

       Back to top

       Back to products page