|
Modes of operation
» Line powered, battery
powered, offline
(battery maintenance
charge)
Test parameters
» Power (watts), HF/RF
current (mA), Test load
(ohm)
Selectable loads
» (monopolar and
bipolar)
» Range: 50-750 ohms
» Step size: 50 ohm
» Accuracy: +4% of
selection, 15 total
selections
Current measurement
(leakage)
» Range: 30-2500 mA
» Resolution: + 1 mA
» Accuracy: + 2.5% of
reading or + 15 mA
whichever is greater
Power measurement
(output)
» Range: 1 to 400 Watts
» Resolution: + 0.1
Watts
» Accuracy: + 5% of
reading or + 3 Watts,
whichever is greater
Frequency response
» Test load: 0 to 500
kHz
» System response: -3 dB
points, 1 kHz to 10 MHz
@ 300 Ohms
CQM test
» 50-750 ohms, 50 ohm
steps (see selectable
load for specs)
Oscilloscope output
» 10 to 1 transformer
coupled output,
uncalibrated
» Connector type: BNC
Battery
» Type: Sealed lead acid
» Time between recharge:
2 hours of continuous
use
» Time to full charge: 8
hours
» Number of cycles: 200
Top panel input
connectors
» Connector type: 4 mm
safety sockets
» Input voltage limit:
10,000 V peak
» Input current limit: 3
Amperes rms
Dimensions
» 6" H x 13" W x 10½" D
» (15.2 cm x 34.24 cm x
30.48 cm)
Weight
» 14.15 lbs. (5.6 kg)
|
Electrosurgery
device testing has never been this simple. The wide
selection of loads available on board makes the
instrument more versatile for the Biomed shop with
multiple ESU makes and models.